PiRacer AI Racer Car Kit for Raspberry Pi 4 Model B

Note: Raspberry Pi 4 Model B is NOT INCLUDED.

PiRacer AI Racer Car Kit is compatible with Raspberry Pi 4 Model B, with at least 4GB RAM.

Note: Batteries are NOT INCLUDED

Safety Cautions:

• Li-ion and Li-Po batteries are quite unstable. They may cause fire, personal injury, or property damage if they're not properly charged or used.
• Do not reversely connect the polarities when recharging or discharging the battery. Do not use an inferior charger/charging panel to recharge the battery.
• Do not mix use old batteries with new ones, avoid using batteries of different brands.
• When buying a Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from the formal manufacturer, and ensure the batteries will work stably and safely by aging test.
• Lithium batteries have a limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reach their max cycle life, or work over two years, whichever comes first.
• Should be placed carefully and properly, keep it away from inflammable and explosive articles, away from children, and avoid any safety accident caused by careless storage.

Note: Wireless Gamepad Controller is included.

Specifications:

CONTROLLER	Raspberry Pi 4 Model B (NOT INCLUDED)
OS	Raspberry Pi OS (Raspbian)
LANGUAGE	Python
CAMERA	5MP HD resolution, 160° FOV wide-angle camera
OLED	0.91" 128×32 pixels
WIRELESS	2.4GHz / 5GHz dual-band WiFi, Bluetooth 5.0
TELEOPERATION	Gamepad, webpage
COMMUNICATION	WiFi
PROTECTION	- Overcharge/discharge protection - Over current protection  - Short circuit protection - Reverse polarity proof
DRIVING TYPE	- Ackerman steering - 2WD Rear Gearmotor
SHOCK ABSORBER	N/A
POWER SUPPLY	12.6V, 18650 battery × 3 (connected in series) (NOT INCLUDED)
MOTOR	37-520 DC Gearmotor Reduction rate 1:10 Idle speed 740RPM
SERVO	9kg/cm torque
CHASSIS	Aluminum alloy chassis
CRASHPROOF	Front sponge
PROGRAM LIBRARY	DonkeyCar
EXPERIENCE REQUIRED	Competition level Experienced programming skills required

1. Raspberry Pi 4 Model B 4GB RAM (NOT INCLUDED)
2. Micro SD Card 32GB (NOT INCLUDED)
3. PiRacer metal kit 6PCS
4. EVA felt pad 2PCS
5. 3D-printed motor lid
6. PiRacer expansion board
7. RPi Camera (G)
8. Acrylic piece
9. Servo mount
10. Metal Gearmotor 2PCS
11. Tire 4PCS
12. Coupler 2PCS
13. MG996R servo
14. MG996R servo wheel
15. Steering knuckle 2PCS
16. Ball bearing 4PCS
17. M3 plastic ball joint 4PCS
18. M3 pull bar 2PCS
19. 12.6V battery charger + EU head
20. Wireless gamepad
21. 6Pin cable
22. Spanner 2PCS
23. Screwdriver 2PCS
24. Mini cross wrench sleeve
25. TF card reader
26. Screws pack
27. Track map

Note: Due to some error from the supplier, your order may come with a slightly different box. You might get a 'JetRacer' box instead of PiRacer. Please make sure:

• the product code sticker on the box is "KIT-PIRACER".
• the SKU code sticker on the box is 17674, PiRacer AI Kit.

If the code is correct, then all the products inside the box are correct. Please refer to the packing list.

Wrong 'JetRacer' box	Correct SKU and product code sticker