Your shopping cart is empty!
Argon Mini Cooling Fan for Raspberry Pi 4 Model B
- Brands Argon40 Code: FAN-RPI-AG-MINI
The Argon Mini Fan HAT is a simple Raspberry Pi HAT that cools the Pi. With both active and passive cooling mechanisms, this Mini Fan does a really good job at keeping your Raspberry Pi 4 Model B board cool.
Surprisingly this mini fan really effective which can reduce the temperature of your Raspberry Pi by 20oC ++. What an amazing cooling fan! Best of all, this Argon fan supports the Raspberry Pi 4 Model B 2GB, 4GB, and 8GB versions. As some of you know, the powerful Raspberry Pi 4 Model B will generate quite a bit of heat even in idle mode, the temperature will rise even higher if it is under load. With the help of this super heatsink with a fan, you will never need to worry about the temperature :) It will keep your Raspberry Pi cool!
The mini fan also comes with a heat sink attached to it that acts as passive cooling mechanism.
With just simple scripts, you'll have full functionality for the HAT, allowing you to adjust the fan speed. Get ready to use this in most Raspberry Pi Case as it is low profile. This fan works well for Raspberry Pi 4 Model B. The fan only utilize 12 of the 40 GPIO pins on the Raspberry Pi, sparing the remaining pins for your other projects! :]
Note: Do not power your Raspberry Pi yet!
Note: Silicon Thermal Pad is a must for proper thermal conductivity. Please make sure you place it properly.
Setting the PWM settings:
Note: This setting will start the Mini Fan at a CPU temperature of 55 degrees Celcius (temp=55000). You may set your own desired initiation temperature as you wish.
Argon40 Mini Fan and The Matching Enclosure? tutorial by Cytron Technologies.
Argon Mini Cooling Fan Stress Test, tutorial by Cytron Technologies.