Description

This is a low-cost 12V DC brush motor with 33mm diameter motor size. It comes with a 270:1 reduction gearhead that produces 1.37Nm torque, and no load speed of 16RPM. Very suitable to build a wheeled mobile robot and other robotic projects.

To control it, you need to get a proper DC motor driver that can cope with at least 2 Amp current because the motor may draw more than 1 Amp current when it is run in full load.

You may need a bracket to fix the motor at the desired location.

You should consider getting the plastic wheel if you are building a wheeled mobile robot.

Alternatively, get the metal key hub so that you can connect the motor shaft with a foreign part easily.

Warranty Period: 12 months

Features

Specifications:

Rated voltage: 12VDC
No load current: < 100mA
No load speed: 16RPM
Rated load torque: 1.37N.m(14kgf.cm)
Rated current: < 650mA
Rated load speed: 12RPM
Weight: 168g
Gear ratio: 270:1
Shaft: 6mm diameter x 15.5mm length

Packing List

1 x 12V 16RPM 14kgfcm Brushed DC Geared Motor

Resources

Documents :

Motor Dimension and Spec

Tutorials:

Make Turntable using MD10-POT Motor Driver

Khairul_Tajudin, 15 Feb 2024

This tutorial is application of MD10POT motor driver that can be use directly from the board without programming. The turntable is produce using 3D Printing method...

12V 16RPM 14kgfcm Brushed DC Geared Motor

Buy locally from a partner

Accessories you may need

DC Geared Motor Bracket (SPG30/SPG50)

Metal Key Hub - 6mm

Specifications:

Make Turntable using MD10-POT Motor Driver

Ask a question

Featured

Popular

12V 16RPM 14kgfcm Brushed DC Geared Motor

Buy locally from a partner

Accessories you may need

Specifications:

Ask a question