160Amp 8V-28V SmartDrive DC Motor Driver

$230.00
Cashback: $6.90
  • 2 or more $218.50
  • 5 or more $207.00
  • 10 or more $195.50
  • Availability: 11

    Buy locally from a partner

    Country:
    Description

    We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehicle), mobile robot and combat robot. One of the reasons is the ease to use it, just connect the two terminals of motor to DC power respectively, it will start rotating, so simple. Yet, to control the speed and direction from a controller, a motor driver is needed. 

    This is SmartDriveDuo-160. Yes! Is 160 Amperes of continuous output current!

     
    It is one of the latest smart series motor drivers. On board high current MOSFETs are switched at 16 KHz to ensure quiet operation and no annoying whining sound. And using MOSFETs eliminate the need for additional flyback diodes. Besides, it also equipped with a microcontroller unit to provide smart features such as multiple input mode, current limiting and thermal protection. SmartDrive160 can also be hooked up with another similar unit and operates in pair. This make driving a robot with differential drive a truly plug and play experience.

    Note: Normal wire cannot survives 160A or even 100A, so get the thickest possible wire for both the Vmotor and Motor. We are using 2 to 3 8AWG cable (Black and Red), for each terminal.

    Features:
    • Bi-directional control for a single brushed DC motor.
    • Support input voltage from 8V to 28V.
    • Is able to deliver maximum current up to:
      • 190A peak (1 minute)
      • 175A (2 minutes)
      • 160A (continuously)
    • 16 KHz switching frequency for quiet operation.
    • LiPo battery low voltage warning.
    • Full Solid State component (MOSFETs) for switching. No additional fly back diodes needed.
    • Regenerative Braking.
    • NO Reverse Polarity Protection for Vmotor, please double check the connection!
    • Thermal protection.
    • Current limiting base on temperature.
      • Below 60°C       : 194A
      • 60°C to 70°C     : 175A
      • 70°C to 80°C     : 163A
      • 80°C to 90°C     : 144A
      • 90°C to 100°C   : 125A
      • 100°C to 110°C : 100A
      • Above 110°C     : 50A
    • Multiple input modes: (configure through the DIP switches)
      • RC (Radio Control)
      • Analog (Analog voltage from Potentiometer or Joystick)
      • PWM and DIR (3.3V and 5V compatible, Arduino or Raspberry Pi)
      • UART (Simplified Serial and Packetized Serial)
    • On board push buttons for fast test and manual operation.
    • Dimension: 122mm x 178mm x 75mm
    Warranty Period: 12 months
    Specifications
    Operating Condition
    Motor Channel1
    Operating Voltage (VDC)8 to 28
    Peak Current (A)190
    Continuous Current (A)160
    Operating Modes
    Arduino ShieldNo - can be used with Wire connection
    PWM (Lock-Antiphase and Sign-Magnitude)Yes
    UARTYes
    AnalogYes
    RC Servo SignalYes
    Special Protection
    Polarity ProtectionNo
    Current / Thermal ProtectionYes
    Appearance
    LEDs IndicatorYes
    Test/Manual ButtonYes
    Cooling FanYes
    Packing List
    • 1 x MDS160A
    Q & A (14)

    Ask a question

    Reviews
    • 5 out of 5
                    
    • 5
      100%
    • 4
      0%
    • 3
      0%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: MDS160A, SmartDrive160, Robot Controller, DC Motor Driver, Ampflow Motor smartdrive160, motor, driver, mds160a