8MP IMX219 Low Distortion M12 Camera Module for Jetson Series

Note: This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.

Note: This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.

This Arducam IMX219 camera module is mainly designed for the NVIDIA Jetson Series of Dev Kit. The highlight of this camera is its very low distortion (less than 3%) of the lens.

Application:

• Unmanned Aerial Vehicles (UAVs)
• Building Drones
• Autonomous Robotic Systems
• Mobile Medical Imaging
• Intelligent Video Analytics (IVA)

• Sensor: Sony 8MP IMX219 image sensor
• Optical Format: 1/4 inch
• Data Format: RAW8/RAW10
• EFL: 2.8mm
• F.NO: 2.8
• View Angle: 75 Deg. (Horizontal)
• Interface: MIPI CSI-2 2-lane
• IR Sensitivity: Visible light, Integral IR Filter
• Compatible with:
  • NVidia Jetson Nano B01 Dev Kit
  • NVidia Jetson Orin Nano Dev Kit
  • NVidia Jetson AGX Orin Dev Kit

Camera Specifications:

• Image Sensor: IMX219
• Still Resolution: 8MP
• Video Modes: 
  • NVIDIA Jetson Nano: 3280x2464@21fps
  • NVIDIA Jetson Xavier NX: 3280x1848@28fps
  • NVIDIA Jetson Orin NX: 1920x1080@30fps
  • NVIDIA Jetson Orin Nano: 1640x1232@30fps
  • NVIDIA Jetson AGX Orin: 1280x720@60fps
• Sensor Resolution: 3280 x 2464 pixels
• Sensor Image Area: 3.68 x 2.76 mm (4.6 mm diagonal)
• Pixel Size: 1.12 µm x 1.12 µm
• Optical Size: 1/4"
• IR Sensitivity: Integral IR-cut Filter, visible light only
• Peaking Current: 300mA
• Camera Board Size: 24mm x 25mm

Lens Specifications:

• Focus Type: Manual Focus
• Focal Length: 2.8mm
• F.NO: F2.8
• Field of View (FOV): 88°(D) x 75°(H) x 60°(V)
• Lens Mount: M12 Mount
• Distortion: <3%

• 1 x 8MP IMX219 Low Distortion M12 Camera Module
• 1 x 15cm 15-15pin FPC cable

• IMX219 image sensor datasheet
• IMX219 camera Quick Start Guide